Add Orange Pi 5 Ultra WiFi/BT support and tart_defconfig
- Enable SDIO WiFi (brcmfmac) via mmc@fe2d0000 with mmc-pwrseq - Enable Bluetooth (brcm,bcm43438-bt) via uart7 serdev node - Create tart_defconfig based on android_orangepi5_defconfig - PIN mappings from jimmyhon/linux max-wifi branch (GPIO2 PC5 WIFI_REG_ON, GPIO4 PC4 BT_REG_ON, SDIO sdiom0_pins, UART7 uart7m0_xfer + ctsn/rtsn)
This commit is contained in:
parent
a55f311433
commit
a72eba56bd
2 changed files with 10472 additions and 0 deletions
|
|
@ -1,4 +1,5 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
// Copyright (C) 2026 Brendan Szymanski <hello@bscubed.dev>
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
|
|
@ -7,6 +8,17 @@
|
|||
#include "rk3588-orangepi-5.dtsi"
|
||||
|
||||
/ {
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clock-names = "ext_clock";
|
||||
clocks = <&hym8563>;
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
post-power-on-delay-ms = <200>;
|
||||
power-off-delay-us = <5000000>;
|
||||
reset-gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc5v0_usb30_otg: vcc5v0-usb30-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
|
|
@ -87,6 +99,32 @@
|
|||
rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wireless-bluetooth {
|
||||
bt_reg_on: bt-reg-on {
|
||||
rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
host_wake_bt: host-wake-bt {
|
||||
rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<2 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins =
|
||||
<0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm4 {
|
||||
|
|
@ -141,3 +179,56 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_host_pwren>;
|
||||
};
|
||||
|
||||
&sdio {
|
||||
#address-cells = <1>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <150000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdiom0_pins>;
|
||||
sd-uhs-sdr104;
|
||||
#size-cells = <0>;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-0 = <&wifi_host_wake_irq>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&uart7 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart7m0_xfer &uart7m0_ctsn &uart7m0_rtsn>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&hym8563>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA0 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-names = "host-wakeup";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_reg_on>, <&host_wake_bt>, <&bt_wake_host>;
|
||||
shutdown-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
vbat-supply = <&vcc_3v3_s3>;
|
||||
vddio-supply = <&vcc_1v8_s3>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
10381
arch/arm64/configs/tart_defconfig
Normal file
10381
arch/arm64/configs/tart_defconfig
Normal file
File diff suppressed because it is too large
Load diff
Loading…
Add table
Add a link
Reference in a new issue