Allows to write correct value for biBitCount into BITMAPINFOHEADER.
Before, ff_put_bmp_header() always wrote "24" as biBitCount
for utvideo because bits_per_coded_sample was never set by the
encoder.
the bps value is only stored with level >= 1, using rgb48 with level 0 requires the
user app to keep track of the bps by external means, which does not always happen
also we force level >= 1 for other 16bps formats, so this is consistent.
Found-by: Jerome Martinez <jerome@mediaarea.net>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This is intended to workaround bug "665 Integer Divide Instruction May
Cause Unpredictable Behavior" on some early AMD CPUs, which causes a
div-by-zero in this codepath, such as reported in Mozilla bug #1293996.
Note that this isn't guaranteed to fix the bug, since a compiler is free
to reorder instructions that don't depend on each other. However, it
appears to fix the bug in Firefox, and a similar patch was applied to
libvpx also (see Chrome bug #599899).
1.MMI_ load/store macros are defined in libavutil/mips/mmiutils.h
2.Replace some unnecessary unaligned access with aligned operator
3.The MMI_ load/store is compatible with cpu loongson2e/2f which not support instructions start with gs
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The MMX state must be cleared between using MMX and using memory allocation
thats basically the only location between the 2
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
vp9_cx_iface actually allows values in range [0..2].
This fixes ticket #5894.
Signed-off-by: Kagami Hiiragi <kagami@genshiken.org>
Signed-off-by: James Zern <jzern@google.com>
Thanks to Mathieu Malaterre <malat@debian.org> for reporting the
Que/Queue typo. (https://bugs.debian.org/839542)
Reviewed-by: Lou Logan <lou@lrcd.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Otherwise another frame gets referenced into picture, triggering an assert
(from commit 13aae8) in av_frame_ref.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes asserts (from commit 13aae8) in av_frame_ref and
av_frame_move_ref.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
on OSX:
../configure --disable-everything --enable-demuxer=hls make
error message: Undefined symbols for architecture x86_64:
"_av_vda_default_init2", referenced from:_videotoolbox_init in
ffmpeg_videotoolbox.o
so add av_vda_default_init2 when CONFIG_H264_VDA_HWACCEL=0
Signed-off-by: Steven Liu <lq@chinaffmpeg.org>
Reviewed-by: wm4 <nfxjfg@googlemail.com>
Reviewed-by: Xidorn Quan <quanxunzhen@gmail.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This function must be called from the mb or slice encoding loop and MMX state may not
be clean there
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Performance improvements:
quant_bands:
with: 681 decicycles in quant_bands, 8388453 runs, 155 skips
without: 1190 decicycles in quant_bands, 8388386 runs, 222 skips
Around 42% for the function
Twoloop coder:
abs_pow34:
with/without: 7.82s/8.17s
Around 4% for the entire encoder
Both:
with/without: 7.15s/8.17s
Around 12% for the entire encoder
Fast coder:
abs_pow34:
with/without: 3.40s/3.77s
Around 10% for the entire encoder
Both:
with/without: 3.02s/3.77s
Around 20% faster for the entire encoder
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
Tested-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: James Almer <jamrial@gmail.com>
It's container level information on some formats (Matroska, MXF, yuv4mpeg), so
it should be printed at higher log levels than debug.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: James Almer <jamrial@gmail.com>
The calculation of width/height should round up, not round down to
prevent setting width or height to 0.
Also image->comps[compno].w is unsigned (at least in openjpeg2), so the
calculation could silently wrap around without the explicit cast to int.
Reviewed-by: Michael Bradshaw <mjbshaw@gmail.com>
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
openjpeg 2 sets the data pointers of the image components to NULL,
causing segfaults if the image is reused.
Reviewed-by: Michael Bradshaw <mjbshaw@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Use check_lib2 to test the header together with the function. This is
necessary, because '-DOPJ_STATIC' changes what the included header does.
Also add '-DOPJ_STATIC' to CPPFLAGS, so that it isn't necessary to
hardcode this in libavcodec/libopenjpeg{dec,enc}.c.
Finally, check for non-static openjpeg 2.1, too.
Reviewed-by: Michael Bradshaw <mjbshaw@gmail.com>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
This fixes a build problem for MIPS architecture that looks like this:
libavcodec/mips/h264dsp_msa.c:2498:6: error: conflicting types for
‘ff_weight_h264_pixels16_8_msa’
void ff_weight_h264_pixels16_8_msa(uint8_t *src, int stride,
This bug was introduced by commit bc26fe8927:
avcodec/h264: Use ptrdiff_t for (bi)weight functions
That commit changed the data type of some function parameters in some
function definitions. However, the implementation of those functions in
libavcodec/mips/h264dsp_msa.c wasn't changed accordingly.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The hardware handling of packed bframes was always questionable but
it used to ok with my workaround. Today, not so much. But today we
have a bsf to unpack the bframes, so let's just use that and be
done with it.
With all the various refactorings that have happened over the years,
the current pts logic is very broken for non-trivial cases (ie: ones
where not every frame/field has a meaningful pts assocated with it).
Generally, we do not want to write AV_NOPTS_VALUE as the output
timestamp, regardless of anything else. It's better to pass zero
if there's no other information.
Additionally, interlaced content where the decoder returns each field
separately can result in the first field carrying the timestamp and
the second having AV_NOPTS_VALUE. It's clearly wrong to overwrite
the valid timestamp.
So, let's just never write AV_NOPTS_VALUE into an output frame.
Empirically, this fixed playback of interlaced mpeg2 and h.264 and
mpeg4-asp with packed b-frames in an avi container.
Using lfg was an overkill in this case where the random numbers
were only used for encoder descisions. Should increase result
uniformity between different FPUs and gives a slight speedup.
Signed-off-by: Rostislav Pehlivanov <atomnuker@gmail.com>
